|
 |
 |
|
|
SM-EGT + Gas Temperature Pyro
iMFD Sensor Module - Exhaust Gas Temperature Pyro
Digital EGT Sensor
DESCRIPTION:
SM-EGT accurately measures the exhaust gas temperature or cylinder head
temperature of any internal combustion engine. Any K-Type thermocouple
is compatible. Up to 32 SM-EGT modules can be daisy chained together in
the iMFD system. SM-EGT can also be used as a stand alone unit capable
of interfacing with 3rd party hardware. All Sensor Modules are housed
in high quality extruded aluminum designed to operate even in the most
extreme conditions. In addition, all SM modules offer outstanding
digital accuracy, response and resolution which far exceeds that of a
standard gauge.
|
 PLX Critical Response Technology
|
Users Guide
|
| | Sensor Module Exhaust Gas Temperature Pyro | | with EGT sensor probe | | Price: 119 € (PN SMEGT_Sensor) | |
|
|
| |
| | Sensor Module Exhaust Gas Temperature Pyro | | with out sensor | | Price: 102 € (PN SMEGT) | |
|
|
| |
 |
|
|
| |
|
CONNECTION DIAGRAM:
-
Connects to 12V-18V power source.
-
Analog outputs (0-5V analog output, ground)
-
Termination jumper. Closed for first SM in daisy chain.
-
Connects to next SM in daisy chain or to first DM
-
Connects to previous SM or unconnected if first SM in daisy chain
-
Connects to EGT probe K-Type Thermocouple
TECHNOLOGY:
SM-EGT utilizes the latest digital PID and DSP technologies to maximize sensor reaction time and accuracy without compromising overshoot, and slow settling response time. PLX sensors may be used and installed in your vehicle permanently.
PLX Critical Response Technology
|
|
|
|
| |
There are two recommended uses for the DM-5. The simple setup connects to just one SM module. This is great for stand alone gauges.
The full setup is great for monitoring several SM modules simultaneously. Looking at the above diagram.
ANALOG OUTPUTS:
0-5V analog linear output
(Click to enlarge)
|
|
|
|
|
|
| |
INCLUDED ITEMS:
-
SM-EGT main unit
-
4ft power wire with 2.1mm connector
-
4ft Analog wires and connector with 4 terminals
-
1ft Serial Cable
-
Termination jumper
-
Quick start guide
-
K-Type T.C (sold separately)
The DM-5 EGT is an optional standard 52mm gauge designed to display the measured value from the SM-EGT module. More info...
|
|
RECOMMENDED ACCESSORY:
click here to learn more
|
|
| Physical Dimensions |
2" x 2.875" x 1.125" (52mm x 75mm x 28mm) L x W x H |
| Accuracy |
< 0.1AFR (Gasoline) Wideband, < 0.2AFR (Gasoline) Narrowband |
| Measurement Range |
0-1023 Deg C (32-1873 Deg F) |
| Analog Outputs |
Linear 0-5V (Driving Current 20mA) |
| Operating Voltage |
8V-18V |
| Power Consumption |
0.30 Watts (Max) |
| Operating Temperature |
0 - 85 Deg C |
| Sensor |
One K-Type Thermocouple |
| Enclosure |
Extruded Aluminum |
|
|
|
|
|
|
|
|
